# StandardSpoon Napier Jigger

**URL:** https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102
**Category:** Barware, Equipment, & Technology
**Created:** [April 15, 2019, 2:16pm UTC](https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102 "2019-04-15T14:16:09Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![martin](https://spiritsandcocktails.community/user_avatar/spiritsandcocktails.community/martin/32/777_2.png) [@martin](https://spiritsandcocktails.community/u/martin)
#### Post date: [April 15, 2019, 2:16pm UTC](https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102/1 "2019-04-15T14:16:09Z")

</div>

Kicking off this new barware category with a quick review of the Napier jigger from StandardSpoon.

When Cocktail Kingdom introduced their first “stepped” jigger based on a vintage design, it was silver plated and pricey. I bought one anyway, because I could no longer read the markings on my OXO jigger, and I loved the idea of the stepped design.

The stepped design quickly proved itself for my purposes, but then the silver plating also quickly failed. ☹ So, when I saw a Kickstarter for a stainless steel Napier, I leapt. That eventually yielded the StandardSpoon Napier jigger which can now be ordered on-line:

 ![IMG_0876](https://spiritsandcocktails.community/uploads/default/original/1X/ae722ad0a0741b54e9b94930e191b9da410bc2ec.jpeg)

I went for the handle-less model because I found the handle on the original Cocktail Kingdom model charming, but inconvenient.

Here are the two next to each other for comparison:

 ![IMG_0877](https://spiritsandcocktails.community/uploads/default/original/1X/be06ca900e49d020dafb79e737f09530b88fb0fc.jpeg)

The StandardSpoon model is a little taller and considerably lighter (a little over an ounce) compared to the old plated CK model (just under 3 ounces). Both are accurate for my purposes: the respective stepped volumes of both models are consistent with each other, and all their stepped volumes check out with the 1 oz by volume of water ≈ 1 oz by weight test. (These are _jiggers_, not graduated cylinders!)

Here’s the view from above. The narrower design of the StandardSpoon model and the plating failure of the CK model are obvious.

 ![IMG_0878](https://spiritsandcocktails.community/uploads/default/original/1X/3da69034b8402819b2095e438f780c542e9eeb15.jpeg)

I’ve been using the StandardSpoon jigger for many months and am completely happy with it.

Meanwhile, Cocktail Kingdom has rolled out a new line of stepped jiggers in various finishes, with and without handles. I haven’t had the opportunity to evaluate them, but they’re less expensive than the original silver plated model and they look promising.

---

<div class="post-metadata">

### Author: ![dougfitz](https://spiritsandcocktails.community/user_avatar/spiritsandcocktails.community/dougfitz/32/79_2.png) [@dougfitz](https://spiritsandcocktails.community/u/dougfitz)
#### Post date: [April 16, 2019, 7:04pm UTC](https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102/2 "2019-04-16T19:04:32Z")

</div>

Lovely. Do you miss the finer gradations (1/4, 1/3, 3/4)?

---

<div class="post-metadata">

### Author: ![martin](https://spiritsandcocktails.community/user_avatar/spiritsandcocktails.community/martin/32/777_2.png) [@martin](https://spiritsandcocktails.community/u/martin)
#### Post date: [April 16, 2019, 7:59pm UTC](https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102/3 "2019-04-16T19:59:56Z")

</div>

I do not.

I find it easy to estimate the intermediate quantities by sight, particularly since the sides of each section of this jigger design are vertical, rather than pitched. For example, 3/4 oz is exactly halfway between the 1/2 oz and 1 oz features. If I’m pouring tricky ingredients—what I sometimes call “plutonium”—then I’ll break out the measuring spoons.

---

<div class="post-metadata">

### Author: ![martin](https://spiritsandcocktails.community/user_avatar/spiritsandcocktails.community/martin/32/777_2.png) [@martin](https://spiritsandcocktails.community/u/martin)
#### Post date: [May 10, 2019, 12:35pm UTC](https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102/4 "2019-05-10T12:35:32Z")

</div>

I only just realized that these StandardSpoon jiggers have lines etched inside for 1/4 oz and and 3/4 oz.

 ![IMG_0929](https://spiritsandcocktails.community/uploads/default/original/1X/7f1c37b635e806882b66663ffd98debecedb8779.jpeg)

However, the narrower, taller design of these (compared to Cocktail Kingdom’s) makes these lines pretty hard to see, which is why I didn’t notice them before.

Regardless, the stepped design makes eyeballing the intermediate quantities pretty easy.

---

<div class="post-metadata">

### Author: ![dougfitz](https://spiritsandcocktails.community/user_avatar/spiritsandcocktails.community/dougfitz/32/79_2.png) [@dougfitz](https://spiritsandcocktails.community/u/dougfitz)
#### Post date: [May 16, 2019, 12:30am UTC](https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102/5 "2019-05-16T00:30:49Z")

</div>

If I wasn’t sold before, I am now.

---

<div class="post-metadata">

### Author: ![dougfitz](https://spiritsandcocktails.community/user_avatar/spiritsandcocktails.community/dougfitz/32/79_2.png) [@dougfitz](https://spiritsandcocktails.community/u/dougfitz)
#### Post date: [May 18, 2019, 4:02am UTC](https://spiritsandcocktails.community/t/standardspoon-napier-jigger/102/6 "2019-05-18T04:02:56Z")

</div>

My jigger arrived this afternoon and was put to immediate use. Cocktailing successfully achieved.

I also picked up one of their bar spoons as I am congenitally unable to resist sleek, shiny things. If you don’t mind the non-twisted stem, it’s impressively substantial and well-balanced.
